VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC45SV

For hose (inner diameter): 45 mm

Dimension A: hole diameter 46 mm

Dimension B: diameter 79 mm

Dimension C: 75 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC45R

For hose (inner diameter): 45 mm

Dimension A: hole diameter 58 mm

Dimension B: diameter 114 mm

Dimension C: 86 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC45PV

For hose (inner diameter): 45 mm

Dimension A: hole diameter 52 mm

Dimension B: diameter 88 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC40SV

For hose (inner diameter): 40 mm

Dimension A: hole diameter 41 mm

Dimension B: diameter 74 mm

Dimension C: 75 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC40R

For hose (inner diameter): 40 mm

Dimension A: hole diameter 53 mm

Dimension B: diameter 87 mm

Dimension C: 86 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC40PV

For hose (inner diameter): 40 mm

Dimension A: hole diameter 52 mm

Dimension B: diameter 88 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC150SV

For hose (inner diameter): 152 mm

Dimension A: hole diameter 153 mm

Dimension B: diameter 194 mm

Dimension C: 153 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC125SV

For hose (inner diameter): 127 mm

Dimension A: hole diameter 128 mm

Dimension B: diameter 169 mm

Dimension C: 140 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC100SV

For hose (inner diameter): 102 mm

Dimension A: hole diameter 103 mm

Dimension B: diameter 140 mm

Dimension C: 117 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC150

For hose (inner diameter): 152 mm

Dimension A: hole diameter 153 mm

Dimension B: diameter 203 mm

Dimension C: 150 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC125

For hose (inner diameter): 127 mm

Dimension A: hole diameter 128 mm

Dimension B: diameter 178 mm

Dimension C: 140 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC100

For hose (inner diameter): 102 mm

Dimension A: hole diameter 103 mm

Dimension B: diameter 155 mm

Dimension C: 115 mm

VETUS Type TC exhaust outlet.

Easy mounting on the hull.

The TC type is made from reinforced synthetic material with a decorative AISI 316 stainless steel band.

The exhaust pipe can be mounted directly.

Type: TC090

For hose (inner diameter): 90 mm

Dimension A: hole diameter 93 mm

Dimension B: diameter 141 mm

Dimension C: 110 mm

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 24 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 24 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 12 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Indicator for VETUS exhaust temperature alarm, to be mounted with the XHSM or XHSH probes.

Dimension Ø 52 mm, total diameter 62 mm.

Mounting depth 40 mm.

Suitable for 12 Volt DC

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection

Use the XHSH type sensor for mounting in the exhaust pipe

Suitable for exhaust pipe with internal diameter of Ø 60 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 60.

Outlet pipe connection diameter (mm): 60.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

Suitable for exhaust pipe with internal diameter of Ø 50 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 50.

Outlet pipe connection diameter (mm): 50.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

Suitable for exhaust pipe with internal diameter of Ø 45 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 45.

Outlet pipe connection diameter (mm): 45.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

Suitable for exhaust pipe with internal diameter of Ø 40 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 40.

Outlet pipe connection diameter (mm): 40.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 90.

Outlet pipe connection diameter (mm): 90.

Length (mm): 210.

Width (mm): 300.

Height (mm): 525.

Airlock position: Horizontal.

Plastic gooseneck for marine exhaust systems with water injection. Supplied with stainless steel (AISI 316) mounting brackets.

Features :

Water inlet pipe connection diameter (mm): 90.

Outlet pipe connection diameter (mm): 110.

Length (mm): 210.

Width (mm): 300.

Height (mm): 525.

Airlock position: Horizontal.