Complete 75mm height riser kit for Mercruiser V6 or V8 engine.

Old generation wet mounting.

Kit including:

2 75MM exhaust risers

Complete screw kit

Reassembly seals

Complete 152mm height riser kit for Mercruiser V6 and V8 engines.

Old generation wet mounting.

Kit including:

2 exhaust risers 152MM

Complete screw kit

Reassembly seals

6 inch riser for Mercruiser engine.

Engine riser kit for the new DRY type mountings in direct seawater cooling with a height of 4.7 inches.

Exhaust hose at elbow outlet for Mercruiser engine with 100mm diameter.

Round shape.

TOR100/13 winding collar.

Trident wet exhaust pipe without metal reinforcement, more flexible than hoses with reinforcements.

Hose with a smooth surface for better tightening of the clamps but no longer being bent.

Sold in 1 meter sections only.

Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Trident Flex 121°C wet exhaust sleeve with a diameter of 95mm and a length of 17cm, featuring a double jacket for increased longevity, providing a larger pinch-free bend radius than standard standards.

Hose with a smooth surface for better tightening of the clamps.

Sold by the linear meter.

Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.

Hose with a smooth surface for better tightening of the clamps.

Sold by the linear meter.

Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Volvo D3 Exhaust Elbow Cooling Hose.

Exhaust hose for Volvo Penta V6 - V8 engine with 95mm diameter.

Exhaust hose diameter 90 and 100mm, height 75mm.

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC90SV

For hose (inner diameter): 90 mm

Dimension A: hole diameter 91 mm

Dimension B: diameter 123 mm

Dimension C: 110 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC90PV

For hose (inner diameter): 90 mm

Dimension A: hole diameter 97 mm

Dimension B: diameter 140 mm

Dimension C: 95 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC75SV

For hose (inner diameter): 75 mm

Dimension A: hole diameter 77 mm

Dimension B: diameter 110 mm

Dimension C: 93 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC75PV

For hose (inner diameter): 75 mm

Dimension A: hole diameter 97 mm

Dimension B: diameter 140 mm

Dimension C: 95 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC7590R

For hose (inner diameter): 76 and 90 mm

Dimension A: hole diameter 111 mm

Dimension B: diameter 164 mm

Dimension C: 90 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC60SV

For hose (inner diameter): 60 mm

Dimension A: hole diameter 61 mm

Dimension B: diameter 94 mm

Dimension C: 75 mm

VETUS Type TRCR exhaust outlet.

Easy mounting on the hull.

The TRCR type has a soft EPDM rubber connector mounted on the outside of the transom with a 2mm thick AISI 316 stainless steel mounting ring. VETUS silencers and goosenecks with the corresponding dimensions fit directly into the rubber sleeve. To connect the exhaust pipe, a plastic connector type SLVBR or SLVBG is required.

Type: TRC60R

For hose (inner diameter): 60 mm

Dimension A: hole diameter 73 mm

Dimension B: diameter 114 mm

Dimension C: 86 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of a synthetic body. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC60PV

For hose (inner diameter): 60 mm

Dimension A: hole diameter 68 mm

Dimension B: diameter 108 mm

Dimension C: 75 mm

VETUS Type TRCSV exhaust outlet.

Easy mounting on the hull.

The TRCSV type is made of AISI 316 stainless steel. It has an integrated check valve.

The exhaust pipe can be mounted directly on these tailpipes.

Type: TRC50SV

For hose (inner diameter): 50 mm

Dimension A: hole diameter 51 mm

Dimension B: diameter 84 mm

Dimension C: 75 mm