Exhaust hose for catalyst outlet on PCM H5 - H6 series engine.

Inner diameter 115mm.

Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.

Durite disposant d'une surface lisse pour un meilleur serrage des colliers.

Vendu au mètre linéaire.

Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Exhaust hose with elbow outlet for Mercruiser 4 cylinder engine.

Exhaust hose at elbow outlet for Mercruiser engine with 90mm diameter.

Oval shape.

TOR90/13 winding collar.

Tuyau d'échappement humide Trident Flex 121°C disposant d'une double enveloppe pour une meilleure longévité, procurant un rayon de courbure sans pincement plus important que les normes standard.

Durite disposant d'une surface lisse pour un meilleur serrage des colliers.

Vendu au mètre linéaire.

Normes : SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Universal exhaust flap with a diameter of 75mm.

universal through-hull with internal diameter 76mm and external diameter 90mm.

Anti-siphon elbow without valve and with hose. Supplied with ventilation pipe, connection 13 - 32 mm.

Can be used as a drainage system or toilet.

Interchangeable with the AIRVENT type and have the same fixing center distances.

Comes complete with fitting, hose clamps and 2m of hose. Non-valve anti-siphon elbows must be fitted with a ventilation pipe.

The air vent fitting rotates 360°. (Includes a 2 m hose and skin fittings). In addition, the valve can be serviced without removing the vent from the wall and no tools are required for this. For replacement, a set of 5 valves is available as a spare part.

A 13 mm diameter flexible hose can be directly connected to the elbow connections

Can be connected to pipes with inner diameters of 13, 19, 25 and 32 mm.

Size :

Width (mm): 68.

Length (mm): 96.

Height (mm): 133.

Silencer - Volvo type Waterlock with a capacity of 4 liters and two 40mm straight outlets.

Dimensions:

Total length: 310mm

Body length: 200mm

Height of the attachment to the water tap: 155mm

Water connection diameter: 40mm

Silencer - Volvo type Waterlock with a capacity of 4 liters with 2 straight 45mm outlets.

Dimensions:

Total length: 310mm

Body length: 200mm

Height of the attachment to the water tap: 155mm

Water connection diameter: 45mm

Once your boat's engine has been stopped, with the correct volume capacity selected, the VETUS waterlock will ensure that water does not return to the engine. All VETUS water pots are equipped with a drain plug for winter storage.

Suitable for exhaust pipes with an inner diameter of Ø 45 mm.

Capacity: 4.3L

A: 372 x 110 mm

B: 211mm

D: 45mm

1 adjustable entrance

1 fixed output

Once your boat's engine has been stopped, with the correct volume capacity selected, the VETUS waterlock will ensure that water does not return to the engine. All VETUS water pots are equipped with a drain plug for winter storage.

Suitable for exhaust pipes with an inner diameter of Ø 50 mm.

Capacity: 4.3L

A: 372 x 110 mm

B: 211mm

D: 50mm

1 adjustable entrance

1 fixed output

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 10L

A: 515mm

B: 362mm

C: 210mm

D: 75mm

Comes with 2 fixing straps.

Kit de conversion pour ancienne génération ( clamshell ) de collecteurs catalysés indmar.

Kit incluant le nécessaire de remplacement notamment :

4953400

4953401

Tubes de liaison ,visseries et joints.

Catalyst insert kit for new generation Volvo Penta engine manifold including:

- Filter 21571778

- Support 3889967

- Joint 3889966

- Joint 21591352

Exhaust manifold for Volvo Penta and OMC V8 5.7 litre or 5 litre engines on GM base with central exhaust elbow.

Premium quality material from the same manufacturer as Volvo.

Remember the water connection: 50/512/017 or 13965.

Collecteur d'échappement pour moteur Indmar sur base GM similaire au CHV1/83 disposant des 2 trous pour bouchon d'eau en 3/4 prés du plan de joint de coude d'échappement.

Montage essentiellement prévu pour moteur en refroidissement fermé.

Raccord de durite réf: 605012 et 605021

BARR marine exhaust manifold for Volvo Penta and OMC 4.3 litre V6 engines.

Mounting hardware included.

Remember the water connection: 50-512-017 or 13965.

Exhaust manifold for Chrysler engines from 1973 to 1986.

Mounting hardware included.

Exhaust manifold for Mercruiser V6 engine old assembly.

Mounting hardware included.

Exhaust manifold for Mercruiser 4 cylinder engine with a Rochester 2 barrel carburetor with center distances of 82.5 X 47.2 mm.

Manifold generally used with older 2-piece elbow assemblies prior to 1989.

Mounting hardware included.

Collecteur d'échappement babord monobloc pour moteur Indmar 6 litres.

Montage pour moteur ne disposant pas d'un coude en bout de collecteur.

Collecteur d'échappement pour moteur 7.4 et 8.2 litres sur moteur Volvo Penta - OMC.