Complete kit of 2 risers for Mercruiser engine with the new assembly with external water passages type Dry.

Mounting hardware included.

The elbow gaskets included by default are 27-864850A02 and 27-864549A02.

Height of the risers 4.3 cm to be confirmed on your engine.

Exhaust elbow riser sold individually for Crusader V8 engine, height 100mm.

Reassembly gasket included.

Port catalyzed elbow for PCM engine with an anode and not a blue bleed plug.

Starboard catalyzed elbow for PCM engine with an anode and not a blue bleed plug.

Starboard catalyzed elbow for PCM engine with an anode and not a blue bleed plug.

Port catalyzed elbow for PCM engine with an anode and not a blue bleed plug.

Silencer - Volvo type Waterlock with a capacity of 4 liters and two 40mm straight outlets.

Dimensions:

Total length: 310mm

Body length: 200mm

Height of the attachment to the water tap: 155mm

Water connection diameter: 40mm

Once your boat's engine has been stopped, with the correct volume capacity selected, the VETUS waterlock will ensure that water does not return to the engine. All VETUS water pots are equipped with a drain plug for winter storage.

Suitable for exhaust pipes with an inner diameter of Ø 50 mm.

Capacity: 4.3L

A: 372 x 110 mm

B: 211mm

D: 50mm

1 adjustable entrance

1 fixed output

High silence, minimal back pressure

Our NLP waterlocks feature a two-stage design with upper and lower chambers featuring a horizontal separator plate and a rising tube through the center. Exhaust system installation, even in confined engine spaces, is greatly simplified thanks to the 360° rotating chamber and inlet and outlet connectors. For optimal exhaust noise silencing, you can also use a VETUS silencer and gooseneck after the waterlock.

Capacity: 10L

A: 515mm

B: 362mm

C: 210mm

D: 75mm

Comes with 2 fixing straps.

Anti-siphon elbow without valve and with hose. Supplied with ventilation pipe, connection 13 - 32 mm.

Can be used as a drainage system or toilet.

Interchangeable with the AIRVENT type and have the same fixing center distances.

Comes complete with fitting, hose clamps and 2m of hose. Non-valve anti-siphon elbows must be fitted with a ventilation pipe.

The air vent fitting rotates 360°. (Includes a 2 m hose and skin fittings). In addition, the valve can be serviced without removing the vent from the wall and no tools are required for this. For replacement, a set of 5 valves is available as a spare part.

A 13 mm diameter flexible hose can be directly connected to the elbow connections

Can be connected to pipes with inner diameters of 13, 19, 25 and 32 mm.

Size :

Width (mm): 68.

Length (mm): 96.

Height (mm): 133.

Exhaust hose for catalyst outlet on PCM H5 - H6 series engine.

Inner diameter 115mm.

Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.

Hose with a smooth surface for better tightening of the clamps.

Sold by the linear meter.

Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Exhaust hose with elbow outlet for Mercruiser 4 cylinder engine.

Upper exhaust hose diameter 100mm for Volvo Penta - OMC engines.

Trident Flex 121°C wet exhaust pipe features a double jacket for increased durability, providing a larger pinch-free bend radius than standard standards.

Hose with a smooth surface for better tightening of the clamps.

Sold by the linear meter.

Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's

Universal exhaust flap with a diameter of 75mm.

universal through-hull with internal diameter 76mm and external diameter 90mm.