OMC EXHAUST ADAPTER PLATE
Spacer positioned between the elbow and the exhaust manifold of OMC 4-cylinder 2.5L and 6-cylinder in-line 165hp engines to adapt the water passages.

Spacer positioned between the elbow and the exhaust manifold of OMC 4-cylinder 2.5L and 6-cylinder in-line 165hp engines to adapt the water passages.
Exhaust outlet acting as a reducer for mounting on OMC 4-cylinder round elbow type OMC20980536.
Outlet diameter 60mm, 3 screw fixing.
Stainless steel exhaust elbow with a three-screw mounting base for Yanmar engines.
Exhaust elbow for Mercruiser engine.
Mounting hardware included.
Exhaust elbow for Mercruiser 3.7 liter 4 cylinder type 470 engine.
Stainless steel elbow for Yanmar 4LH series engine.
Stainless steel exhaust elbow for Perkins 4.236 M90 engine.
Reassembly gasket included.
Coude d'échappement en fonte pour moteur Yanmar 1 - 2 et 3 cylindres.
Montages prévu sur raccord de liaison à pas inversé de type 104214-13580 non inclus.
Raccord de piquage d'eau non inclus sous référence 104407-44480 en diamètre 17.5mm.
Matériel existant également en INOX sous la référence YMGM321.
La sortie est prévu pour une durite de diamètre 55mm mais dispose également d'un filetage pour adapter la sortie en fonction de votre installation.
Stainless steel exhaust elbow for Yanmar 4LH-HTE and 4LH-TE engines.
Reassembly gasket 119171-13510 included.
Exhaust elbow for Mercruiser diesel engines based on VM in shaft assembly with a 65° inclination.
Coude d'échappement en inox pour moteurs Nothern Lights de types :
M30C / M30CW / M33C / M33CW / M38CR2 / M864K / M864W / M864W3 / L944D / M944T / M944W / NL944D2 / ML944T2 / L984 / M984K / M984W / ML984
Coude d'échappement en acier inoxydable HDI Marine PANDA8
Remplace la pièce Fischer Panda : GIZ1381E00
Convient aux générateurs Fischer Panda :
MINI-8 & MINI-9
Inclus le joint de montage du coude.
Spécifications du coude d'échappement :
Acier inoxydable 316 moulé
Sortie d'échappement de 5" (38 mm)
Le produit pèse 1,4 kg.
Le poids à l'expédition est de 2,3 kg (5 lb)
Kit of 2 pre-elbows for Mercruiser V8 MPI engines with mounting with height risers 75 and 152mm - (3-6 inch).
Straight reducing pre-elbow allowing you to go from a diameter of 90 to 75mm.
Assembly including:
- Pre-elbow
- Necklaces
- Hose for diameter 75mm length 100mm.
Exhaust pre-elbow between exhaust horn and elbow for 4.3 liter V6 engine.
Features :
- Diameter: 102 mm
- Diameter: 90 mm
- Length: 30 cm
Exhaust pre-elbow between horn and elbow for Mercruiser 4 cylinder 3.7 liter type 470 engine.
Features :
- Elbow diameter: 103 mm
- Horn diameter: 80 mm
- Length: 30 cm
Plate gasket included in kit FP17500.
Gasket kit for Mercruiser engine including:
4 pcs inspection hatch seals AP0314
4 pcs elbow gaskets 27-48042
Exhaust elbow gasket for Mercruiser 4 cylinder and V8 engines.
Remember to add the references:
AP0314
27-807218