INDMAR 5.7 STARBOARD CATALYST EXHAUST ELBOW
Starboard exhaust elbow for 5.7 Indmar engine catalyzed after 2011.

Starboard exhaust elbow for 5.7 Indmar engine catalyzed after 2011.
Port exhaust elbow for 5.7 Indmar engine catalyzed after 2011.
Stainless steel exhaust elbow for Northern Lights generator series:
M643
M673
M673L
Complete stainless steel exhaust manifold kit for the following Yanmar QM series engines:
- 2QM15
- 2QM20
- 3QM30
- 3QM30H
Replacement/conversion kit for optional raised mounting including:
- The collector plate integrating the connection allowing the connection nipple to be received (conversion).
- The connecting nipple raised to 3 inches.
- The collector reassembly gasket.
The YM123000 or YM123000I exhaust elbow is not included.
Remember to add it.
Equipment not compatible with Yanmar series: GM, HM, JH, YM
Stainless steel exhaust elbow for replacement of the Yanmar 6LY-UTE assembly with mounting screws.
Kit including the necessary assembly materials, namely:
- hose clamp
- Mounting gasket
- adapter flange
Exhaust diameter 127mm.
Spacer positioned between the elbow and the exhaust manifold of OMC 4-cylinder 2.5L and 6-cylinder in-line 165hp engines to adapt the water passages.
Exhaust outlet acting as a reducer for mounting on OMC 4-cylinder round elbow type OMC20980536.
Outlet diameter 60mm, 3 screw fixing.
Stainless steel exhaust elbow with a three-screw mounting base for Yanmar engines.
Exhaust elbow for Mercruiser engine.
Mounting hardware included.
Exhaust elbow for Mercruiser 3.7 liter 4 cylinder type 470 engine.
Stainless steel elbow for Yanmar 4LH series engine.
Cast iron exhaust elbow for Yanmar 1 - 2 and 3 cylinder engines.
Mountings provided on reverse pitch connection fitting type 104214-13580 not included.
Water tap connection not included under reference 104407-44480 in diameter 17.5mm.
Material also available in stainless steel under the reference YMGM321.
The outlet is designed for a 55mm diameter hose but also has a thread to adapt the outlet according to your installation.
Stainless steel exhaust elbow for Yanmar 4LH-HTE and 4LH-TE engines.
Reassembly gasket 119171-13510 included.
Exhaust elbow for Mercruiser diesel engines based on VM in shaft assembly with a 65° inclination.
Plate gasket included in kit FP17500.
Gasket kit for Mercruiser engine including:
4 pcs inspection hatch seals AP0314
4 pcs elbow gaskets 27-48042
Kit of 2 pre-elbows for Mercruiser V8 MPI engines with mounting with height risers 75 and 152mm - (3-6 inch).
Straight reducing pre-elbow allowing you to go from a diameter of 90 to 75mm.
Assembly including:
- Pre-elbow
- Necklaces
- Hose for diameter 75mm length 100mm.
Exhaust pre-elbow between exhaust horn and elbow for 4.3 liter V6 engine.
Features :
- Diameter: 102 mm
- Diameter: 90 mm
- Length: 30 cm
Exhaust pre-elbow between horn and elbow for Mercruiser 4 cylinder 3.7 liter type 470 engine.
Features :
- Elbow diameter: 103 mm
- Horn diameter: 80 mm
- Length: 30 cm