MERCRUISER 150MM RAISING SCREW KIT
Complete screw kit for 2 Mercruiser risers 150mm high including reassembly seals.

Complete screw kit for 2 Mercruiser risers 150mm high including reassembly seals.
Extension sold individually for Crusader engine with elbow in the middle of the manifold type 98126.
Exhaust connection link for catalyzed PCM engine types H5 - H6.
Silencer - Volvo type Waterlock with a capacity of 4 liters with 2 straight 45mm outlets.
Dimensions:
Total length: 310mm
Body length: 200mm
Height of the attachment to the water tap: 155mm
Water connection diameter: 45mm
Silencer - Volvo type Waterlock with a capacity of 4 liters with a straight inlet and an outlet at 45° upwards with a diameter of 45mm.
Dimensions:
Total length: 310mm
Body length: 200mm
Height of the attachment to the water tap: 155mm
Straight water inlet connection diameter: 45mm
Water outlet connection diameter 45°: 45mm
Once your boat's engine has been stopped, with the correct volume capacity selected, the VETUS waterlock will ensure that water does not return to the engine. All VETUS water pots are equipped with a drain plug for winter storage.
Suitable for exhaust pipes with an inner diameter of Ø 40 mm.
Capacity: 4.3L
A: 372 x 110 mm
B: 211mm
D: 40mm
1 adjustable entrance
1 fixed output
VETUS long waterlock exhaust system for standard exhaust hose.
• Suitable for exhaust pipes with an inner diameter of Ø 45 mm
• Rotating inlet and outlet tips
• Comes with 1 safety strap
Capacity: 5.7L
A: 430 x 152 mm
B: 310mm
D: 45mm
Exhaust horn flap width 63mm, length 79mm present in the horn of the Cobra bases.
4 cylinder application.
Exhaust horn for Volvo Penta V6 - V8 engines.
Exhaust horn for Mercruiser diesel engine with base having a round outlet and not an oval one.
The following Mercruiser diesel applications:
- CMD 2.8 EI - ES
- CMD 4.2 EI - ES - MI - MS
- CMD QSD 2.8 EI - ES
- CMD QSD 4.2 EI - ES
- D2.8L / 165 D-TRONIC VM169
- D4.2L / 200L LD
- D4.2L / 220 IDI
- D4.2L / 250 D-TRONIC
- D4.2L / 300 D-TRONIC
Valveless anti-siphon device with ventilation line. Supplied with connector, hose clamps and 4 m of 8 x 14 mm hose.
Can be used as an exhaust system or toilet.
Can be connected to pipes with internal diameters of 13, 19, 25 and 32 mm.
A 13mm diameter pipe can be directly fitted to the elbow fittings.
Size :
Width (mm): 50.
Length (mm): 98.
Height (mm): 162.
Materials:
Elbow, seat, valve and edge outlet: synthetic material.
Spring: Stainless steel.
Exhaust and cooling hose adapter allowing the connection of hoses with different diameters.
Exhaust hose for Indmar Raptor engine.
Trident 200 Series unarmored wet exhaust pipe featuring a double jacket for increased longevity.
More flexible and thinner hose than the Trident flex hose for assemblies requiring greater tolerance such as on free exhausts.
Hose with a smooth surface for better tightening of the clamps.
Sold by the linear meter.
Standards: SAE J2006-R2, ABYC, NMMA P-1, Lloyd's
90° angled exhaust sleeve with internal diameter 100mm, length 21cm.
Exhaust and cooling hose adapter allowing the connection of hoses with different diameters.
Durite d'échappement pour moteur Yanmar 4LHA - 6LPA reliant le coude d'échappement à la corne d'embase.
6LPA - DTZE
6LPA - DTZEP1
6LPA-STZE
6LPA-STZEP1
4LHA
Complete exhaust flap kit including all parts for Corsa brand assemblies.
Exhaust manifold for Mercruiser 6 cylinder diesel engine.
When replacing a D254 engine with a 8M0084547 manifold, remove the factory manifold and use the L0010 adaptation kit in addition.
Perkins manifold hardware kit.
Plate for inspection hatch on Perkins manifold.
Exhaust manifold for OMC 4 cylinder GM153 - 2.5 litre and GM181 - 3 litre engines before 1990.