KANZAKI YANMAR 177095-03190 REVERSE SHAFT

Take full control of your boat's propulsion with our marine gearboxes, designed for reliable shifting and efficient power transmission.
The reverse gear allows seamless switching between forward and reverse, ensuring precise, safe maneuvering in all conditions.
Our gearboxes provide a reliable connection between the engine and the propeller shaft, enhancing performance and protecting transmission components.
Built with corrosion-resistant materials, our gearboxes withstand harsh marine conditions and integrate with both inboard and hybrid propulsion systems.
Available for Volvo, Mercury, Mercruiser, OMC, PCM, and other marine propulsion systems.
Steel friction disc for ZF inverter with the following dimensions:
Outer diameter: 96.5mm
Tooth spacing: 1.77mm
Hurth Marine Application:
HSW630 hydraulic
HSW630 V-drive
HSW800
HSW800 V-drive
Bronze friction disc for ZF inverter with the following dimensions:
Outer diameter: 134mm
Thickness: 2 mm
36 teeth
Hurth Marine Application:
HSW630 hydraulic
HSW630 V-drive
HSW800
HSW800 V-drive
Reverse gear disc outer diameter 88mm inner 68mm mounting for Yanmar Kanzaki series reverse gear:
- KBW20
- KBW20-1
- KBW21
12 discs are required per inverter.
Yanmar reverse gear oil dipstick.
Tube length: 9.5cm.
Bronze friction disc for Yanmar reverse gear type KBW10.
Yanmar KM3 - KM4 series reverse gear gauge.
Tube length: 14cm
Steel friction disc for Yanmar reverse gear type KBW10.
Complete gasket kit for PCM 80A series inverter with a ratio of 1.23.
Oil pump oil seal for Velvet Drive 71 - 72C series inverter.
Complete gasket kit for the following inverters:
- ZF63A hydraulic
- Hurth HSW630 hydraulic
- ZF63IV - V-DRIVE
Kit suitable for all types of ZF63 inverter.
Friction disc for Borg Warner inverter.
2-3 discs are generally required in Corretcraft 71C and 72C boat assemblies with the exception of inverters under part numbers 10-17-001 and 10-17-002 which only require one disc.
Materials included in kit RK160019
Ø EXT 19 CM
Solenoid valve for reversing on all PCM 80 series inverters.
Support washer for the following ZF - HURTH types of inverter:
HBW20
HBW220
HBW250
Inner diameter: 32mm
Outer diameter: 64.4mm
Rear oil seal for Velvet Drive inverter series 71 - 72.
IRM80-type PCM reversor with a ratio of 1.23/1 and an electrical inversion control.
Front face outlet oil seal for PCM brand V-Drive Power Plus in 1.48/1 ratio.
Neutral safety probe for Velvet Drive - Borg Warner brand inverter from 1981 and later as well as PCM inverters.
Complete seal kit for Hurth ZF inverter types HBW10 and HBW150.
Fixing bolt for inverter.
Stud for velvet inverter.
PCM brand V-drive power plus inlet oil seal in 1.48/1 ratio.
Kit of 12 pressure springs for Borg Warner brand inverter - Velvet drive type 71 and 72.