Heat exchanger

Heat exchanger cover for Volvo Penta engine with a 90° water connection, 20mm diameter.

Diameter: 61mm

Water tap diameter: 20mm

Cover for heat exchanger core on Volvo Penta engine 90° elbow

Diameter: 70mm

Water connection diameter: 20mm

Height: 70mm

Brass spacer for heat exchanger on the following engines:

- Volvo Penta D4 and D6 series.

- Mercruiser diesel CMD - QSD following:

- CMD 2.8 EI 170 - 200

- CMD 2.8 ES 170 - 200

- CMD QSD 2.8 EI 170 - 210 - 220 - 230

- CMD QSD 2.8 ES 170 - 210 - 220 - 230

- CMD QSD 4.2 EI 270 - 320 - 350

- CMD QSD 4.2 ES 270 - 320 - 350

Plate with a small hole on the edge acting as a key.

Volvo Penta heat exchanger cover for 54mm diameter cooler core.

Echangeur de température YANMAR complet incluant :

- les couvercles d'échangeurs

- le faisceau

- le bouchon

Pensez à rajouter les joints de remontage suivants :

- 119717-13110

- 128370-13201

Heat exchanger cover for PERKINS 4108 engine with a 90° water connection.

Diameter: 70mm

Water connection diameter: 22mm

Remember to add the necklaces:

1 pcs: TOR50/13

1 pcs: TOR60/13

Right exchanger cover for PERKINS 4108 engine.

Diameter: 52mm

Water connection diameter: 28mm

Height: 55mm

Heat exchanger cover for Volvo Penta MD2040 engine with 90° water connection.

Diameter: 90mm

Water connection diameter: 21mm

Echangeur de température complet pour moteur Yanmar série :

3JH40

3JH4E

3JH5E

3JH5AE

Heat exchanger cover for Perkins 4108 engine with a straight water connection of 28mm diameter.

Diameter: 70mm

Water inlet diameter: 28mm.

Remember to add the necklaces:

1 pcs TOR50/13

1 pcs TOR60/13

Volvo Penta heat exchanger cap, height 27mm to be confirmed.

For all orders please confirm that the equipment you currently have has a total height of 27mm.

For 32mm mounting please refer to reference VP15035.

Heat exchanger cover kit including reassembly kit.

Total outer diameter: 95mm

Support groove diameter: 90mm

Heat exchanger cover kit including reassembly kit.

Total outer diameter: 70mm

Support groove diameter: 65mm

Yanmar heat exchanger cap.

Pressure: 0.9kg

Upper diameter: 60mm

Lower diameter: 38mm

Heat exchanger for Volvo Penta D1-30 engine types:

D1-30A

D1-30B

D1-30F

Complete temperature exchanger including the following items:

1 pcs: harness 3842019

1 pcs: cover 3842022

1 pcs: cover 3842021

1 pcs: cover 888622

1 pcs: thermostat 3842015

1 pcs: fitting 3842014

1 pcs: cap 982364

4 pcs: stud 3584203

1 pcs: NI822 purge fitting

Remember to add the reassembly seal to the engine block with reference: VP12402.

Complete YANMAR heat exchanger including:

- exchanger covers

- the beam

- the cork

- bleed screw

Remember to add the following reassembly seals:

129550-13110

129472-18090

120mm - 5-1/8" diameter heat exchanger cover kit including reassembly kit

Rubber heat exchanger cover with the following dimensions:

- Inner diameter 55mm

- Inner diameter 33mm

- Height 46mm

Heat exchanger cover for Volvo Penta engine with 90° water connection.

Mounting for cooling core diameter 50.8mm.

Diameter: 70mm

Water connection diameter: 27mm

Perkins 4108 engine heat exchanger plug:

Outer diameter: 70mm

Seal diameter: 52mm

Height: 25mm

Pressure: 5KPA

Volvo Penta heat exchanger cap, height 32mm.

Upper diameter 60mm

Lower diameter 38mm

Please confirm the cap height 32 or 27mm.

Bouchon d'échangeur de température yanmar.

Pression : 0.9kg

Diamètre supérieur : 46mm

Diamètre inférieur : 28mm

Volvo Penta heat exchanger cap, height 28mm.