Starters for marine engines
Reliable engine starting in demanding marine conditions
Guarantee reliable engine starts with our marine starters, designed to withstand the challenges of marine use.
Powerful and reliable engine starting
The starter motor delivers the necessary torque to start your boat's engine quickly and efficiently, every time.
Durable design for marine environments
Our starters are built to resist moisture, corrosion, and vibrations, ensuring durability and dependable performance at sea.
Compatible with marine engines
Suitable for Volvo, Mercury, Mercruiser, OMC, PCM, and other marine engines, providing reliable starting power for your boat in all conditions.
11CM STARTER SCREW
Specific starter screw length 11 cm - 3/8-16.
Mounting on reduction starter types DR30460 - DR51150.
For metric screws present on new engine blocks, refer to reference 10/861788.

YANMAR 12V STARTER
11 tooth 12 volt starter for Yanmar engines with multiple applications 2 - 3 - 4 cylinders.
YANMAR 1-2-3 GM STARTER
STARTER REDUCTION GM ALIGNED FIXING
9-tooth reduction starter designed for attachment to the engine block along the oil pan using 2 screws on the same axis.
Fixing:
- Short screw type PG600
- Long screw type PG601R
Screw kit included.
Starter replacing the older generation without reduction in reference DR9597.
Mounting for flywheel with a diameter of 32.4 cm.
ARCO brand starters are quality products that surpass original starters and cannot be compared with low-end adaptable equipment.

12CM STARTER SCREW
VOLVO STARTER
12 volt starter for Volvo Penta diesel engines.
SUZUKI DF80 - DF350 STARTER MOTOR
Starter motor for new generation Suzuki engine for application:
DF90 after 2017
DF80 after 2017
DF70 after 2017
DF100 2021 - 2023
DF150 after 2018
DF175 after 2018
DF200 after 2018
DF225 after 2018
DF250 after 2018
DF300 after 2018
DF325 after 2018
DF350 after 2018

INDMAR RAPTOR STARTER - MACHINING
Starter motor for Ford Raptor engine after 2019 in upper part mounting with machining on the front face.
Original Indmar starter.

GM BIG STARTER ALIGNED FIXING
Large model 9-tooth starter with 2 fixing screws on the same axle.
- Short screw type PG600
- Long screw type PG601
Screws not included.
MERCURY STARTER 135-350HP
14 tooth starter for the following Mercury outboard motors:
- DFI - OPTIMAX: 115 to 200HP 2.5L SN OT178500 and after - 200 to 250HP 3L SN OT467442 and after
- VERADO: 135 to 350HP after 2005 with a solenoid on the starter.
Solenoid only: SW463
STARTER MOTOR YAMAHA 300 - 425HP
Starter for the following Yamaha engines:
300HP F - LF 2007 - 2009
350HP after 2007
425HP after 2007

DEMARREUR FORD V8 RH
Démarreur à réduction 10 dents pour moteur Ford 5L et 5.8L en rotation standard CCW disposant d'un ordre d'allumage 1-8-4-5-6-2-7-3.
SUZUKI DF70 STARTER - 300HP
Starter for the following Suzuki - BRP engines:
70 - 90hp from 2009 to 2016
80hp from 2009 to 2017
150 - 175hp from 2006 to 2017
200hp from 2005 to 2017
225 - 250hp from 2004 to 2017
300hp from 2007 to 2017
YANMAR YS/B STARTER
DEMARREUR VOLVO SERIE D1-D2-30/40 2030
Démarreur 9 dents pour moteurs Volvo Penta :
D1-30A
D1-30B
D2-40A,B,C
D2-55A,B,C
D2-75A
DEMARREUR MERCRUISER CMD 879172259
Démarreur pour moteur Mercruiser Diesel - Cummins sur base VM.
YANMAR 6LP STARTER
FORD V8 LH STARTER
Arco brand premium quality 10-tooth reduction starter for Ford 5L and 5.8L engines in standard CW rotation with a firing order of 1-3-7-2-6-5-4-8.

GM 4-6-8CYL BIG STARTER OFFSET
Large model starter for standard rotating engine with 2 offset screws for mounting along the oil pan.
Mounting on 36cm diameter flywheel.
FORD STARTER MOTOR RH ROTATION
Starter for Ford engine in right reverse rotation with a firing order of 1-8-4-5-6-2-7-3.

STARTER LINE SHAFT CCW
Starter for standard LH rotating motor with a fixing on the top of the coupling bell by 2 screws.
Mounting opposite the engine block.

STARTER REDUCTION GM ALIGNED FIXING
9-tooth reduction starter designed for attachment to the engine block along the oil pan using 2 aligned straight screws.
Fixing:
- Short screw PG600
- Long screw PG601R
Screws not included.
Starter replacing the older generation without DR9597 type reduction.
Mounting for flywheel with a diameter of 32.4 cm.
YAMAHA STARTER 200-250HP
Starter for Yamaha 200 - 250hp engines from 2003 to 2009.

INDMAR RAPTOR STARTER - 3 SCREWS
Starter motor for Ford Raptor 6.2 litre engine with high mounting by 3 screws.
