YANMAR CRANKSHAFT REAR OIL SEAL

Remanufactured reverse rotation RH engine block pre-1990 for GM 7.4 liter V8 base
Features :
- 2-piece rear crankshaft oil seal
- GM454 generation IV engine base
- Oval intake passages
- Kit of 2 sprockets for the distribution (without chain)
- Reverse rotation: ignition 1-2-7-5-6-3-4-8
- Drilling for the fuel pump axle
Engine including:
- Rocker cover (G6 type aluminum)
- Sheet metal oil pan
- Timing case
- Front damper
- Intake and exhaust gaskets
Perfect product for replacing your Crusader, Chriscraft, RIVA engine...
Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.
Engine including high quality internal parts to meet marine requirements.
Pre-filter decanter water separator gasoline 205 liters / hour, body and plastic support recommended up to 150 hp.
Water/fuel separator pre-filter with transparent bowl and plastic filter holder (2 inlets and 2 outlets, supplied with 8 mm fittings, caps and clamps)
Allows the presence of water in gasoline to be detected.
Starter for the following MERCURY engines:
- 150HP EFI 4T
- V6 3.4L 175 to 225 HP
- V8 4.6L 225 to 300 HP
Stainless steel lock washer for propeller shaft diameter 22 and 25mm.
Washer for locking the anode nut.
Specific oil pan gasket for Chricraft 283 engine with original assembly with Paragon reverse gear.
Teflon braid with PTFE impregnation sold by the meter.
Section 14 X 14 mm
Max 110 Amp battery tray with the following dimensions:
internal: 384X177X205mm
external: 440X240X260mm
Minor repair kit for Sherwood P1732 series pump on Caterpillar engine.
Minor kit including:
- Turbine
- Cyclam
- Friction plate
- Pump cover
- Water pump claw
- Installation tool
- Key
Complete seal kit for Paragon HF7 direct 1/1 inverter.
Adjustable lever fuel level indicator for tanks from 10 to 60cm deep.
240-33 ohm resistor for instrumentation types: Teleflex, Mercury, Faria ... excluding VDO .
Stainless steel metal parts.
Ceramic friction resistor, platinum contacts (up to four million movements guaranteed).
Patented movable rod delay system that cancels pitch/roll effect.
5 fixing holes, center distance 60mm, outer diameter 70mm.
Manual transfer pump, length 1.70 m
The simplest and most efficient system for transferring all liquids without energy
Suitable for use with: diesel, kerosene, cleaning products, sea water, thinners and alcohols.
1/4 x 1/8 male-female reducer coupling.
Thread: 1/4
Hose: 1/8
1/2 NPT diameter plug - 20.95mm with 6-sided hexagonal male head.
Straight fuel connection.
Thread: 1/8
Hose: 6mm
Connecting joint for Chriscraft 283 engine block, timing side.
Piston ring set for a Mercruiser D254 diesel engine cylinder.
Complete bearing set for GM 4 cylinder engine in 0.75mm repair dimension.