These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 55kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 39' / 8m to 12m

Nozzle diameter (mm-inch): 150mm / 5.9"

Weight without tunnel: 17 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 250

CCE battery in EN value (min/max): 650/1250

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 45kgf

Spark protection available: yes

Power (kw-hp): 3kw / 4hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 37' / 8m to 11.5m

Nozzle diameter (mm-inch): 125mm / 4.92"

Weight without tunnel: 16 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 250

CCE battery in EN value (min/max): 625/1250

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 40kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 26' to 34' / 8m to 10.50m

Nozzle diameter (mm-inch): 140mm / 5.5"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 35kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 20' to 30' / 6m to 10m

Nozzle diameter (mm-inch): 125mm / 4.92"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 35kgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): 20' to 30' / 6m to 10m

Nozzle diameter (mm-inch): 150mm / 5.9"

Weight without tunnel: 12 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 160

CCE battery in EN value (min/max): 367/733

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 285kgf

Spark protection available: no

Power (kw-hp): 17.5kw / 23.5hp

DC motor: 48V

Recommended boat length (ft - m): 60' to 100' / 20m to 30m

Nozzle diameter (mm-inch): 300mm / 11.8"

Weight without tunnel: 68 kg

For DC system Volt: 48V

Main battery switch: BATSW600 - BPMAIN24

Main fuse: 355

CCE battery in EN value (min/max): 933/1866

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.

These original VETUS DC bow and stern thrusters are the basis for a wide range of DC electric thrusters such as VETUS Standard DC Thrusters, Extended Range Thrusters, Explosion-Proof Thrusters and Retractable Thrusters. Developed and perfected with 40 years of hard work, installed on boats all over the world and operating in all possible conditions.

The advantages of VETUS bow thrusters are endless, but below we highlight the most important features:

Minimal noise pollution due to the unique six-blade propeller design, bevel gears and flexible coupling

High quality control panel made of aluminum and interchangeable with older panels

Smooth flow thanks to a profiled base

Built-in thermal switch to prevent overheating

Eliminates corrosion and reduces weight with synthetic propellers

High performance, efficient and reliable carbon brush electric DC motor

Easy installation and clear instructions

Simple and intuitive use

Features :

Thrust*: 25Kkgf

Spark protection available: yes

Power (kw-hp): 1.5kw / 2hp

DC motor: 12V

Recommended boat length (ft - m): less than 24' / less than 7m

Nozzle diameter (mm-inch): 110mm / 4.33"

Weight without tunnel: 10 kg

For DC system Volt: 12V

Main battery switch: BATSW250 - BPMAIN12

Main fuse: 125

CCE battery in EN value (min/max): 333/667

* All VETUS DC thrusters are rated at a battery voltage of 10.5 or 21 VDC. This takes into account the voltage drop caused by the thruster.