Multi-function manual transfer pump offering a wide variety of possibilities.

Practical, space-saving, with a nitrile turbine.

The ATTWOOD portable electric bilge pump is a submersible bilge pump for removing standing water from your bilge.

Fully portable, this pump has a maximum delivery height of 1m and can evacuate up to 900 liters per hour with new batteries.

It does not require any electrical connection as it operates on 3 D-size batteries (not included). Its battery life therefore depends on the quality and condition of the batteries. For longer battery life, it is preferable to use alkaline batteries.

Installing the batteries is very easy with a quarter turn. Storage is also very simple: simply wrap the hose around the body of the bilge pump.

This portable bilge pump comes with a 1 meter hose and a male fitting.

Diameter: 130 mm

Height: 190 mm

These space-saving bilge pumps sense the bilge water level and start and stop automatically.

They fit into tight spaces in the bilge, under an engine or under the cockpit floor.

Narrow, compact design for confined spaces where other pumps cannot fit.

Patented sensor automatically detects water level by electric field - No trigger required.

Waterproof electronics - protected against water damage.

Quick and easy installation - long wires, strainer and adjustable outlet to fit your bilge.

Insensitive to wave movements.

Possibility of a forced march.

Semiconductor switch - no mechanical movement.

Environmentally friendly - mercury free.

3-year warranty.

Technical characteristics:

Nominal voltage: 12 V

Flow rate: 40L/min

Flow rate at 1m height: 34L/min

Charging current: 3.4 A

Fuse size: 5 A

Cable section: 1.5mm²

Maximum evacuation height: 3 m

Pipe diameter: 19 or 25mm (barbed fitting)

Dimensions: 212 x 54 x 75 mm

Weight: 326 g

From conception to design, including the choice of materials, the Tsunami range has been developed to meet the specific constraints of submersible bilge pumps.

Delivered pre-assembled, ready for installation.

Permanent magnet motor.

316 stainless steel axle.

12 volt power supply.

Manual bilge pump.

Capacity 2888L/H

3/4 - 19MM connection

From conception to design, including the choice of materials, the Tsunami range has been developed to meet the specific constraints of submersible bilge pumps.

Delivered pre-assembled, ready for installation.

Permanent magnet motor.

12 volt power supply

316 stainless steel axle.

Manual bilge pump

Capacity 2090L/H

3/4 - 19MM connection

Attwood 12v trigger with a fairing for all brands of bilge pumps.

Heavy-duty ABS construction, designed for intensive use on professional vessels. Resists corrosion and hydrocarbons. Parabolic chamber for improved water circulation, engine cooling, and reduced fuel consumption.

24 volt power supply.

Manual bilge pump.

Capacity 6840L/h

1-1/8 connection

Hand water pump for various water transfers.

- Double motor mounting and support plate with 1/4 turn snap-in.

- Pump-motor assembly interchangeable with Tsunami bilge pumps of the same power.

- Identical size for all models.

- Permanent magnet motor, stainless steel shaft, 90 cm electric cable with anti-corrosion treatment.

Features :

- Volt: 12 V

- Flow rate at level: 3030 L/h

Sahara type 12 volt automatic bilge pump.

Robustness, ease of use and efficiency:

Automatic start-up ensured by a non-toxic and mercury-free floating contactor.

Engine protected against water infiltration, particularly at the electrical cable entry and the engine shaft. The engine is cooled by the water circulation generated by the propeller.

Capacity: 3100L/h

Connection: 1-1/8 - 29MM

12v trigger without fairing for all brands of bilge pumps.

Bilge Pump Series 36600 12V 30L/mm

Diaphragm bilge pump. Model 36600 - 12V - 15A fuse 30 liters/min max Self-priming up to 3m. Connections for 19mm hose. …

RULRM500B AUTOMATIC BILGE PUMP

New generation of RULE MATE submersible bilge pumps!

COMPACT: New smaller base for less space requirement

HIGHER FLOW RATE: The new turbines allow the maximum flow rate to be reached from 12V instead of 13.6V, i.e. a flow rate gain of 10%

ELECTRONIC SENSOR: Detection and activation of the pump from 5cm of water then stopping of the pump when the level reaches 0.9cm

THERMAL PROTECTION: Thermal Cut-Off (TCO) System

CHECK VALVE: Prevents water backflow, reduces bad odors and keeps the bilge clean

INTEGRATED VENT: Allows air to escape from the installation to avoid power losses

AUTO RULE 1100A-B BILGE PUMP

New generation of RULE MATE submersible bilge pumps!

COMPACT: New smaller base for less space requirement

HIGHER FLOW RATE: The new turbines allow the maximum flow rate to be reached from 12V instead of 13.6V, i.e. a flow rate gain of 10%

ELECTRONIC SENSOR: Detection and activation of the pump from 5cm of water then stopping of the pump when the level reaches 0.9cm

THERMAL PROTECTION: Thermal Cut-Off (TCO) System

CHECK VALVE: Prevents water backflow, reduces bad odors and keeps the bilge clean

INTEGRATED VENT: Allows air to escape from the installation to avoid power losses