Protect your outboard motor against theft! The procedure is as follows:

Simply replace one of the original nuts with a McGard security nut.

You can use the McGard anti-theft device for the following engines:

- Nissan 25CV and more

- Suzuki 25 - 140CV (until 2004)

- Tohatsu 25HP and more

- Johnson/Evinrude 40HP and up (4-stroke)

Game 74054 contains:

- 1 anti-theft nut, M12x1.75 thread

- 1 key

- 1 code card

Additional information:

- Thread: M12x1.75

- Total length: 19 mm

- Key opening: 16 mm

HP Hub Kit for Mercury Engines including: Front Thrust Washer (Hardened), Steel Drive Sleeve (9.20cm - 3 5/8 in), Rear Adapter, Nut Lock and Propeller Nut.

Standard length hub for use with Fury, Tempest Plus, Mirage Plus, REV 4, Trophy Plus, Bravo I & Maximus propellers (Bravo One 400hp+ sterndrive, 1" prop shaft).

Complete 19-spline 500 series propeller hub kit for engines under 200HP from the following brands:

- OMC SX

- Volvo Penta SX

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Complete 15-spline 500 series propeller hub kit for engines under 200HP from the following brands:

- Suzuki

- Honda

- Johnson

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Stainless steel lock washer for propeller shaft diameter 40mm.

Washer for locking the anode nut.

Kit d'hélices origines / OEM Volvo penta duoprop - DP type B6 incluant :

3 pales avant : 854827

3 pales arrière : 854835

Applications moteurs essence.

Hélice moyeu long en rotation gauche LH de 14X19.

3-blade aluminum propeller with dimensions 10.375X13 in right rotation RH.

Works with 20 series hub systems to be added at time of purchase.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller measuring 10.5X13 in right rotation RH.

Works with 10 series hub systems to be added at time of purchase.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller with dimensions 10.375X14 in right rotation RH.

Works with 10 series hub systems to be added at time of purchase.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller measuring 13.25X19 in right rotation RH.

Works with 500 series hub systems to be added at time of purchase.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing. Turning Point is the only manufacturer offering this technology on aluminum propellers.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

3-blade aluminum propeller measuring 13.25X21 in right rotation RH.

Works with 500 series hub systems to be added at time of purchase.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing. Turning Point is the only manufacturer offering this technology on aluminum propellers.

The high rake reduces the vortex effect produced by the propeller and helps lift the stern of the boat and improves overall performance.

Maneuverability and planing are improved thanks to the progressive pitch and propeller cup.

The 5-step manufacturing process delivers a uniform, durable, high-quality, visually pleasing and corrosion-resistant finish.

Express Mach3 OS 3-blade stainless steel propeller with dimensions 15.6X17 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

The new Express Mach3 OS series of large-diameter stainless steel propellers feature the latest developments and are the hallmarks of the Turning Point brand. These modifications have produced a propeller that provides excellent planing, impressive bow lift, and exceptional turning performance. The Express Mach3 OS is ideally suited to high-powered boats. It is suitable for all outboards from 90 hp and above, as well as sterndrives. The large-diameter, three-bladed propellers offer excellent fuel economy in many applications.

Express Mach3 OS 3-blade stainless steel propeller with dimensions 15.6X19 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

The new Express Mach3 OS series of large-diameter stainless steel propellers feature the latest developments and are the hallmarks of the Turning Point brand. These modifications have produced a propeller that provides excellent planing, impressive bow lift, and exceptional turning performance. The Express Mach3 OS is ideally suited to high-powered boats. It is suitable for all outboards from 90 hp and above, as well as sterndrives. The large-diameter, three-bladed propellers offer excellent fuel economy in many applications.

Propeller cone for Volvo Penta DPH series outdrive.

DPH-A

DPH-C

DPH-D1

DPH-E

For a base with H series propellers use the 23000185 spinner.

Rear propeller nut for Volvo Penta drive types:

- SX-A

- DPS-A

- SX-C

- DP-SM

- XDP-B

Mounting intended for F or D series propeller sets.

Brass hydrolube ring with the following metric dimensions:

Shaft: 40 mm

Outer diameter: 55 mm

Total length: 160 mm

Other variations on request.

Hub kit for Evinrude/Johnson outboard motors and OMC drives with 15 splines.

Caution! When installing stainless steel propellers, remove the anode attached to the bearing housing and check the clearance before operation.

835467008 Front thrust washer

879637 Plastic drive sleeve

834899Q Rear adapter

8M0107489 Nut

89961 Split pin

8M0118201 Spacer washer

Complete 8-spline 200 series propeller hub kit for 6 to 15 HP engines from the following brands:

- Mercury

- Mariner

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Complete 10-spline 20-series propeller hub kit for 20-30 hp engines from the following brands:

- Yamaha

- Parsun

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.

Complete 15-spline 500 series propeller hub kit for engines under 200HP from the following brands:

- Honda

The innovative one-piece design reduces the number of component parts and eliminates the risk of malfunction

that are usually found on competing systems.

High-tech reinforced polymer construction enhances the product's 'flexibility', eliminating possible breakage

due to material fatigue.

High quality corrosion resistant brass grooves.

Hub kits are designed to be reusable even after most damage, eliminating the need

to replace the hub system when replacing the damaged propeller.