Express Mach3 3-blade stainless steel propeller measuring 14.25X23 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

Utilizing nearly 40 years of experience in racing boats and high-performance propeller design, our Express Mach3 range incorporates all the best techniques and technologies available to get the most out of your boat. Aggressive rake, radical design, streamlined cup. These 3-blade propellers excel at reaching top speed, while providing better handling and acceleration.

New designs can bring dramatic improvements in boat performance. The fuel savings will pay for the cost of a new propeller within one or two seasons, making it a wise investment.

Exclusive stainless steel, TP17â„¢

Nearly 250% stronger and 5 times more durable than standard stainless steel, this new material allows Turning Point engineers and designers to create radical new designs that will help you get the most out of your boat.

MaxSpeed??â„¢ Dyno Balance Process

Gives your boat a smoother ride, higher top speed, and improved fuel economy. This process is standard on every propeller and is only offered as an expensive option by other manufacturers.

The high-flow exhaust system maximizes gas flow which increases power and top speed.

Turning Point propellers feature massive exhaust vents allowing more exhaust flow and less back pressure.

Events for rapid planing.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing.

Kit moyeu HP pour moteurs Mercury comprennant : Rondelle de poussée avant (durcie), manchon d'entraînement en acier (9,20cm - 3 5/8 po), adaptateur arrière, frein d'écrou et écrou d'hélice.

Moyeu de longueur standard pour utilisation avec les hélices Fury, Tempest Plus,Mirage Plus, REV 4, Trophy Plus, Bravo I & Maximus (Transmission en Z Bravo One 400 ch+, arbre d'hélice 1").

Express Mach3 3-blade stainless steel propeller measuring 14.25X21 in RH right rotation.

Works with 500 or 700 series hub systems to be added at time of purchase.

Utilizing nearly 40 years of experience in racing boats and high-performance propeller design, our Express Mach3 range incorporates all the best techniques and technologies available to get the most out of your boat. Aggressive rake, radical design, streamlined cup. These 3-blade propellers excel at reaching top speed, while providing better handling and acceleration.

New designs can bring dramatic improvements in boat performance. The fuel savings will pay for the cost of a new propeller within one or two seasons, making it a wise investment.

Exclusive stainless steel, TP17â„¢

Nearly 250% stronger and 5 times more durable than standard stainless steel, this new material allows Turning Point engineers and designers to create radical new designs that will help you get the most out of your boat.

MaxSpeed??â„¢ Dyno Balance Process

Gives your boat a smoother ride, higher top speed, and improved fuel economy. This process is standard on every propeller and is only offered as an expensive option by other manufacturers.

The high-flow exhaust system maximizes gas flow which increases power and top speed.

Turning Point propellers feature massive exhaust vents allowing more exhaust flow and less back pressure.

Events for rapid planing.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing.

Hub kit for Mercury/Mariner 40-60 hp CT/Bigfoot, 70-250 hp, Force 90-120, Verado 150-300, MerCruiser Alpha, Alpha One & Bravo One (below 400 hp) engines.

835467 1 Forward thrust washer

879637 Plastic drive sleeve

826074Q1 Rear adapter with nut lock

827614 1 Propeller nut

Express Mach3 3-blade stainless steel propeller measuring 14.25X19 in right rotation RH.

Works with 500 or 700 series hub systems to be added at time of purchase.

Utilizing nearly 40 years of experience in racing boats and high-performance propeller design, our Express Mach3 range incorporates all the best techniques and technologies available to get the most out of your boat. Aggressive rake, radical design, streamlined cup. These 3-blade propellers excel at reaching top speed, while providing better handling and acceleration.

New designs can bring dramatic improvements in boat performance. The fuel savings will pay for the cost of a new propeller within one or two seasons, making it a wise investment.

Exclusive stainless steel, TP17â„¢

Nearly 250% stronger and 5 times more durable than standard stainless steel, this new material allows Turning Point engineers and designers to create radical new designs that will help you get the most out of your boat.

MaxSpeed??â„¢ Dyno Balance Process

Gives your boat a smoother ride, higher top speed, and improved fuel economy. This process is standard on every propeller and is only offered as an expensive option by other manufacturers.

The high-flow exhaust system maximizes gas flow which increases power and top speed.

Turning Point propellers feature massive exhaust vents allowing more exhaust flow and less back pressure.

Events for rapid planing.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing.

Kit moyeu pour moteurs Yamaha de types :

115-130Cv 4Temps

115-130Cv 2Temps

150-300Cv 2Temps et HPDI et VMAX

Rondelle de poussée en une pièce

Express Mach3 3-blade stainless steel propeller measuring 14.25X17 in RH right rotation.

Works with 500 or 700 series hub systems to be added at time of purchase.

Utilizing nearly 40 years of experience in racing boats and high-performance propeller design, our Express Mach3 range incorporates all the best techniques and technologies available to get the most out of your boat. Aggressive rake, radical design, streamlined cup. These 3-blade propellers excel at reaching top speed, while providing better handling and acceleration.

New designs can bring dramatic improvements in boat performance. The fuel savings will pay for the cost of a new propeller within one or two seasons, making it a wise investment.

Exclusive stainless steel, TP17â„¢

Nearly 250% stronger and 5 times more durable than standard stainless steel, this new material allows Turning Point engineers and designers to create radical new designs that will help you get the most out of your boat.

MaxSpeed??â„¢ Dyno Balance Process

Gives your boat a smoother ride, higher top speed, and improved fuel economy. This process is standard on every propeller and is only offered as an expensive option by other manufacturers.

The high-flow exhaust system maximizes gas flow which increases power and top speed.

Turning Point propellers feature massive exhaust vents allowing more exhaust flow and less back pressure.

Events for rapid planing.

The vents allow gases to escape, reducing the water density around the blades during acceleration. This allows the propeller to spin faster at low speeds, improving its power. More power at low speeds ensures better acceleration and faster planing.