Active filters
Marine exhaust systems for boats - Robust and reliable solutions
Catégories >

Categories

Reset this group
Moteur >

Feed

Year

motor base

Fuel

Brand

Displacement

Model

cid

Family

Helix

Off/inboard

Injection

Number of cylinder

Period

room for

Power

transmission type

Cycle

Commercial designation

Attributs >

Brand

|
744 item(s)
PCM H5-H6 EXHAUST HOSE

PCM H5-H6 EXHAUST HOSE

RÉF. R045242 | PLEASURECRAFT MARINE

Exhaust hose for catalyst outlet on PCM H5 - H6 series engine.

Inner diameter 115mm.

Livraison express → Tuesday 22 July
|
Livraison classique → Thursday 24 July
Commandez dans les
00 h 00 m 00 s
Disponible
33.6 €33.60 VAT included
€28.00 VAT excluded
PLEASURECRAFT MARINE PLEASURECRAFT MARINE
Quantity
Voir le produit
EXHAUST VALVE DIAMETER...

EXHAUST VALVE DIAMETER 127-152MM

RÉF. AP5023 | EMP

Universal exhaust flap with diameters from 127 to 152 mm.

Livraison express → Tuesday 22 July
|
Livraison classique → Thursday 24 July
Commandez dans les
00 h 00 m 00 s
Disponible
64.8 €64.80 VAT included
€54.00 VAT excluded
EMP EMP
Quantity
Voir le produit
EXHAUST TEMPERATURE ALARM...

EXHAUST TEMPERATURE ALARM PROBE FOR EXHAUST PIPE

RÉF. DM_VE_XHSH | VETUS

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
157.5 €157.50 VAT included
€131.25 VAT excluded
VETUS VETUS
Quantity
Voir le produit
SYNTHETIC GOOSENECK LT50

SYNTHETIC GOOSENECK LT50

RÉF. DM_VE_WLOCKLT50 | VETUS

Suitable for exhaust pipe with internal diameter of Ø 50 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 50.

Outlet pipe connection diameter (mm): 50.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
165 €165.00 VAT included
€137.50 VAT excluded
VETUS VETUS
Quantity
Voir le produit
ANTI-SIPHON ELBOW TYPE ASD...

ANTI-SIPHON ELBOW TYPE ASD 13/19/25/32 MM WITH VALVE

RÉF. ASDV | VETUS

Anti-siphon elbow without valve and with hose. Supplied with ventilation pipe, connection 13 - 32 mm.

Can be used as a drainage system or toilet.

Interchangeable with the AIRVENT type and have the same fixing center distances.

Comes complete with fitting, hose clamps and 2m of hose. Non-valve anti-siphon elbows must be fitted with a ventilation pipe.

The air vent fitting rotates 360°. (Includes a 2 m hose and skin fittings). In addition, the valve can be serviced without removing the vent from the wall and no tools are required for this. For replacement, a set of 5 valves is available as a spare part.

A 13 mm diameter flexible hose can be directly connected to the elbow connections

Can be connected to pipes with inner diameters of 13, 19, 25 and 32 mm.

Size :

Width (mm): 68.

Length (mm): 96.

Height (mm): 133.

Livraison express → Tuesday 22 July
|
Livraison classique → Thursday 24 July
Commandez dans les
00 h 00 m 00 s
Disponible
126 €126.00 VAT included
€105.00 VAT excluded
VETUS VETUS
Quantity
Voir le produit
EXHAUST GAS SEPARATOR Ø 50...

EXHAUST GAS SEPARATOR Ø 50 WITH Ø 75 MM CONNECTION, 360° ROTATABLE

RÉF. DM_VE_LGS7550 | VETUS

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

Features :

360º rotating pipe fittings for 75mm internal pipe diameters

50mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
511.5 €511.50 VAT included
€426.25 VAT excluded
VETUS VETUS
Quantity
Voir le produit
GOOSENECK TYPE NLPG 75MM

GOOSENECK TYPE NLPG 75MM

RÉF. DM_VE_NLPG75 | VETUS

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 75 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
365.5 €365.50 VAT included
€304.58 VAT excluded
VETUS VETUS
Quantity
Voir le produit
Back to top
744 item(s)
Vous ne trouvez pas votre pièce moteur bateau ?
(c’est bateau)
Devis gratuit