Kit of 2 pre-elbows for Mercruiser V8 MPI engines with mounting with height risers 75 and 152mm - (3-6 inch).

Suitable for exhaust pipe with internal diameter of Ø 60 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 60.

Outlet pipe connection diameter (mm): 60.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

With a 20 litre capacity and a 75mm connection, this separator is suitable for engines up to 125hp.

The splitter's compact design ensures it will fit most boats.

Features :

Rotating pipe fittings for easy installation

75mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 90 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

VETUS long waterlock exhaust system for standard exhaust hose.

• Suitable for exhaust pipes with an inner diameter of Ø 45 mm

• Rotating inlet and outlet tips

• Comes with 1 safety strap

Capacity: 5.7L

A: 430 x 152 mm

B: 310mm

D: 45mm

Made from specially blended NAVIDURIN® composite, which is heat resistant up to 260°C.

While the NLP airlock design is already well known for its soundproofing characteristics, versatile installation options and extremely low back pressure, it now adds mechanical properties capable of meeting any challenge and placing it in a unique position on the market.

The thermal resistance to deformation under pressure is 250°C, almost double that of standard GRP materials, while the tensile and flexural strength are the same. What's more, all these advantages are available at a weight almost half that of the competition.

Features a 360° rotating body and endless connection options. Comes with floor and bulkhead mounting brackets and drain plugs for winter storage.

Suitable for 90mm exhaust system.

Features :

Capacity (liters): 10.

Length (mm): 515.

Width (mm): 210.

Height (mm): 362.

Airlock position: Vertical.

% Noise Reduction: 35.