Kit of 2 pre-elbows for Mercruiser V8 MPI engines with mounting with height risers 75 and 152mm - (3-6 inch).

Exhaust temperature alarm probe, two probes available for VETUS mounting.

Use the XHSM sensor in VETUS waterlocks with a pre-installed connection.

Use the XHSH type sensor for mounting in the exhaust pipe

Note: Temperature sensors and alarm unit must be ordered separately. In the case of a

twin-engine installation, 2 sensors can be connected to one alarm unit.

Suitable for exhaust pipe with internal diameter of Ø 60 mm.

The gooseneck raises the exhaust line above the waterline and provides additional reduction of the

noise. The outlet fits directly onto all VETUS rubber exhaust outlets.

Features :

Water inlet pipe connection diameter (mm): 60.

Outlet pipe connection diameter (mm): 60.

Length (mm): 182.

Width (mm): 135.

Height (mm): 502.

The VETUS gas/water separator has a dual function. It separates the injected raw cooling water from the exhaust gases and also functions as a gooseneck. Particularly important for generator sets, the separator reduces exhaust noise and discharges the cooling water below the waterline, thus avoiding the characteristic splashing noise.

With a 20 litre capacity and a 75mm connection, this separator is suitable for engines up to 125hp.

The splitter's compact design ensures it will fit most boats.

Features :

Rotating pipe fittings for easy installation

75mm cooling water drain

Comes with a stainless steel (AISI 316) mounting bracket with synthetic straps

Combined with a silencer, the gooseneck saves installation time and space while maintaining the essential qualities of a good exhaust system with incredibly negligible back pressure. Prevents water from backing up the exhaust.

Suitable for pipes with an internal diameter of Ø 90 mm.

*Interchangeable connector for 65 mm hose (SET00025) available separately.

Fully rotating sections and pipe fittings ensure easy installation. Comes with a pipe fitting to connect the ventilation.

Features :

Capacity (liters): 10.

Length (mm): 285.3.

Width (mm): 160.

Height (mm): 646.4.

Airlock position: Vertical.

% Noise Reduction: 25.

Manufactured from the specially blended NAVIDURIN® composite, heat-resistant up to 260°C. The same applies to thermal resistance to deformation under pressure. The HPW series is ideal for applications where the system is put to the test, such as commercial vessels or coast guards. This ability to handle extreme conditions, combined with the rotating bodies and pipe fittings, makes the HPW series a cost-effective alternative to expensive, high-end custom solutions.

It has a 360º rotating body and allows for infinite connection of hose fittings. It comes with floor mounting brackets. Large capacity water lifter provides complete safety for your engine. Excellent noise attenuation with minimal back pressure.

Features :

Capacity (liters): 55.

Water inlet pipe connection diameter (mm): 152.

Outlet pipe connection diameter (mm): 152.

Length (mm): 950.

Width (mm): 440.

Height (mm): 648.

Airlock position: Vertical.

% Noise Reduction: 30.

VETUS long waterlock exhaust system for standard exhaust hose.

• Suitable for exhaust pipes with an inner diameter of Ø 45 mm

• Rotating inlet and outlet tips

• Comes with 1 safety strap

Capacity: 5.7L

A: 430 x 152 mm

B: 310mm

D: 45mm