Spacer for Mercury console control box - Mercruiser.

Thickness of 32mm.

Console control box for replacement of the 4500 series on Mercury outboard twin engines with trim control.

Mounting intended for G2 type control cables.

Black and chrome console control box for replacement of the 4500 series on Mercury outboard motors with trim.

Mountings provided for G2 type control cables.

Non-recessed side control box for Mercury engine with 600A control cable including the following stations:

- Key switch

- Circuit breaker

- Extension harness ending in 14 male Deutch type pins.

Consider the following adapters:

- old 8-pin assemblies allowing you to convert Deutch 14-pin tips into 8 mixed pins: 84-896539T01

- Analog rectangular socket assemblies: 84-892990T01

Black and chrome flush-mounted side control box for Mercury outboard motors with trim.

Use on G2 control cable.

This side-mounted engine control can be used with mechanically controlled engines from 12 to 110 hp. The AFSTZIJ should be mounted within reach of the vessel's helm, on the port or starboard side.

The mechanical part of the lever is made of painted zinc, finished with a plastic housing and an ergonomic rubber grip. The AFSTZIJ operates with push/pull cables and has a built-in safety mechanism to protect the transmission. The clutch can only be engaged at idle. The AFSTZIJ is the ideal motor for sailing boats. (Without neutral safety switch).

Features:

Length: 138 mm

Width: 110 mm

Height: 78 mm

Side control box for water ski boats of the Correctcraft - Mastercraft and other types.

Assembly with internal potentiometer.

For any requests, please contact us directly.

Dual function, ideal for inboard. Chrome casing, equipped with a safety start...

Replacement for Teleflex MT-3 series.

Housing and lever in AISI 316 stainless steel.

This side-mounted single-lever control features push-pull cables that can be installed horizontally or vertically.

Features:

Length: 142 mm

Width: 122 mm

Height: 85 mm

Lever length: 200 mm

Recessed depth: 243 mm

Housing and lever in AISI 316 stainless steel.

This side-mounted single-lever control features push-pull cables that can be installed horizontally or vertically.

Features:

Length: 142 mm

Width: 122 mm

Height: 85 mm

Lever length: 200 mm

Recessed depth: 243 mm

Side-mounted sailboat-style control box.

works with 33c cables

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 1 on the left

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 1 left with trim control

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 2

EC4 type control box, high quality with the latest technology available.

This high-quality electronic engine control box is made of high-quality AISI 316 stainless steel with a hand-polished stainless steel housing and is suitable for both motor and sailing yachts. It can operate single or twin engines and has multiple helm station options with identical controls at all stations. Communication is via the CAN-bus protocol.

The EC4 is easy to install and configure and meets EMC requirements as standard.

Features

• Available for 12 and 24 Volt

• Waterproof (IP67)

• Suitable for mechanically controlled motors, combined mechanical/electronic motor control or fully electronic motor control

• Suitable for mechanical or hydraulic reducers and sterndrives

Option

Trolling valve control, trim or bow thruster control.

Technical:

Length: 151mm

Width: 140mm

Height: 161mm

Handle: 2 with trim control

Double console box for Suzuki twin engine with trim and cable control.