Marine gearboxes and reverse gears for boats - Page 3

Pressure flange dimensions:

Exterior 134mm

Interior 73.66

Oil dipstick for Borg Warner - Velvet Drive series 71 and 72 inverter.

Brown oil dipstick for PCM inverter type IRM80A with engraving 3201201016.

Oil cooler for Volvo Penta D4 and D6 engines as a replacement for MOTA brand coolers but at a significantly lower cost.

Cooler with the same thermal characteristics but with a simpler architecture.

Retrofit cooling kit providing better cooling than the original Volvo coolers.

The presence of a larger number of bundles increases the cooling capacity.

Much more economical material than the original Volvo material.

Hardware including installation kit.

Complete gasket kit for the Velvet Drive brand V-drive series 71 and 72.

Output shaft oil seal for Velvet Drive series 71 - 72C inverter.

Connecting joint between the Chriscraft 283 engine block and the Paragon inverter.

Complete disc kit for Paragon brand inverter types:

- HF7 DIRECT - right output

- P21 ratio 1:1

- P22 ratio 1.5:1

- P23 ratio 2.04:1

- P24 ratio 2.52:1

- P25 ratio 3.00:1

P300 / P31 series ratio 1:1

Kit including 6 bronze discs, 7 metal discs, circlips.

For a non-direct Paragon HF7 inverter, refer to reference ALT750J

Complete friction disc kit for Velvet Drive - Borg Warner 72 series inverter.

Kit including the following positions:

- 6 small steel forward discs .068

- 7 small bronze discs .060

- 1 front pressure disc

- 1 rear pressure disc

Friction disc for Borg Warner inverter.

2-3 discs are generally required in Corretcraft 71C and 72C boat assemblies with the exception of inverters under part numbers 10-17-001 and 10-17-002 which only require one disc.

Materials included in kit RK160019

Ø EXT 19 CM

Complete friction disc kit for Velvet Drive - Borg Warner 71 series inverter.

Kit including:

- 5 bronze discs

- 4 steel discs

- 1 front pressure disc:

- 1 rear pressure disc

Complete repair kit for Hurth HBW 5 - 50 and 100 inverter including:

- 8 bronze discs .063

- 6 .056 steel discs

Kit de disques pour inverseur de marque Hurth marine type HBW360A incluant les postes suivants :

- 8 disques de friction OEM 9473202402 - ALT705

- 8 disques aciers OEM 9650103501 - ALT704

Complete IRM80 inverter kit for PCM type FORD engine with a ratio of 1.23/1.

The IRM40 type inverters are now replaced by more robust IRM80 series inverters.

Kit including the following positions:

- Inverter

- Oil cooler

- Flexible

- Coupling

- Mounting kit

IRM80 PCM reversor with a ratio of 1.1/1 and a mechanical inversion control.

Planned mounting for PCM type V-DRIVE.

Clutch cone for Yanmar KM2P reverse gear.

Diameter: 67.8mm

Height: 43mm

PCM brand inverter type IRM80 with a ratio of 1.1/1 and an electric inversion control.

Installation intended for PCM type V-DRIVE.

Complete inverter from Velvet Drive - Borg Warner type 71C with a ratio of 1/1.

GM small block application.

Complete replacement kit for ZF electric inverter 45 series with a ratio of 1:1 by a Velvet Drive brand inverter of the same characteristics and size.

Original INDMAR replacement.

Assembly for inverters with an electric selector for changing from forward to reverse gear.

Electric reverse gear.

Kit including:

- reassembly/screws kits.

- Jiffy type oil hose.

ZF brand inverter series 30 with straight output allowing the replacement of KBW inverters.

Ratio 2.70.

SAE4 flange for mounting on Yanmar turbo engines of types: 4JH4-TE - 4JH80 - 4JH110.

When replacing a Kanzaki brand Yanmar reverse gear with a ZF reverse gear it is necessary to also replace the coupling using part number 129673-81250.