PCM 40A - 40I INVERTER SEAL KIT
Complete seal kit for the repair of a PCM brand inverter IRM40A - IRM40I series with a ratio of 1.23 or 1/1.

Complete seal kit for the repair of a PCM brand inverter IRM40A - IRM40I series with a ratio of 1.23 or 1/1.
Output oil seal for PCM brand inverter type IRM40A.
Output shaft oil seal for Velvet Drive series 71 - 72C inverter.
Oil seal for Velvet 5000 series inverter.
Complete gasket kit for PCM 80I series inverter with a 1/1 ratio.
Full MRI80 reverse kit for GM type PCM engine with ratio 1.23/1.
IRM40 type reversers are now replaced by more robust IRM80 series reversers.
Kit including:
- Reverse
- Oil cooler
- Coupling
- Flexible
- Installation kit
IRM80S PCM inverter kit for GM motor in V-DRIVE mounting with a ratio of 1/1.
Conversion allowing the replacement of the old IRM40 inverser by this new generation more efficient.
Kit including:
- Reverse RA157025
- Coupling
- Oil cooler
- Flexible
- Installation kit
IRM80-type PCM reverser with a ratio of 1.23/1.
Selector seal for ZF series inverter:
- HSW450
- HSW630
- HSW800
Coupling bell protection plate type MC2444187 for Mercruiser engine in shaft line mounting.
7 screw mounting.
Rebuild gasket kit for the following Volvo Penta MS2 series reverse gears:
MS2
MS2A-D
MS2A-E
MS2B
MS2B-L
MS2B-R
MS2L-E
Oil pump oil seal for Velvet Drive brand inverter - Borg Warner series 71 and 72.
Complete gasket kit for inverter types ZF45A - HSW450A-2
Complete seal kit for inverter types:
- HSW450D
- ZF45C
- ZFC-W
- HSW630D
- ZF63C
- ZF88C
Oil seal for Velvet 5000 series inverter.
Complete seal kit for Hurth ZF 20 - 220 - 250 series inverter.
Complete repair kit for Hurth ZF HBW10 and HBW150 inverter.
Kit including:
- All reassembly seals
- 8 bronze friction discs, 1.6 mm thick
- 8 steel friction discs, 1.42 mm thick
On the first generation there are inverters with 6 steel discs.
In this case, refer to reference ALT903.
Complete repair kit for Hurth ZF HBW10 and HBW150 inverter.
Kit including:
- All reassembly seals
- 8 bronze friction discs, 1.6 mm thick
- 6 steel friction discs, 1.42 mm thick
The latest generation of inverters has 8 steel discs.
In this case, refer to reference ALT903A.
ZF63 - Hurth HSW630 Inverter Disc Kit including:
- 8 bronze discs: 2mm x 134mm - 36 teeth
- 10 steel discs: 1.77mm x 96.5
Complete friction disc kit for Velvet Drive - Borg Warner 71 series inverter.
Kit including:
- 5 bronze discs
- 4 steel discs
- 1 front pressure disc:
- 1 rear pressure disc
ZF reversing disc kit types ZF45A - HSW450A including:
5 pcs: bronze discs 489120
6 pcs: steel discs 489119
ZF brand inverter series 30 with straight output allowing the replacement of KBW inverters.
Ratio 2.15.
SAE4 flange for mounting on Yanmar turbo engines of types: 4JH4-TE - 4JH80 - 4JH110.
When replacing a Kanzaki brand Yanmar reverse gear with a ZF reverse gear it is necessary to also replace the coupling using part number 129673-81250.
Coupling bell for 6L and 6.2L engines from PCM, CRUSADER , INDMAR .
Nut for Velvet inverter - Borg Warner.
Applications:
Velvet Drive 71 - 72 V-DRIVE
Velvet Drive S5000
Nut for Velvet drive 71 and 72C inverter output.