VOLVO V6 ENGINE MOUNT OEM - 3853972
Rear engine mount for Volvo - OMC petrol engines with a COBRA or SX type base.
Mounting for V6 petrol engine.
For assemblies on 4 cylinder and V8 engines, refer to reference AP3728.

Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
Rear engine mount for Volvo - OMC petrol engines with a COBRA or SX type base.
Mounting for V6 petrol engine.
For assemblies on 4 cylinder and V8 engines, refer to reference AP3728.
Complete fixing kit including washers, nut and threaded rod for SP6043 M20 series motor mount.
HD mounting kits allow for finer alignment than standard mounting kits.
Due to their design, the HD kits offer the capacity to line 5 to 10 mm depending on the thread. (10 mm for M20).
The lower nut support area offers a larger surface area, making adjustment easier, more precise and more durable over time. 48 hours of adjustment is required before locking the entire unit.
These kits meet the needs of recent high-revving engines.
Engine mount for universal application but especially Volvo Penta with the following characteristics:
Center distance: 182mm
Width: 112mm
Total height: 68mm
Hardness: 65
Thread: M20
Note: support to be used in addition to the SP18004-HD fixing kit
Rear engine mount for Yanmar engines with a saildrive base type SD20 - SD25 or SD30.
Engine applications: 3YM20, 3YM30, 3GM30 and 3HM35.
Note on rubber / engraved: 230
Maximum load: 150 kg
Rear engine mount for Yanmar 2GM and 2YM15 series engines with an SD20 - SD25 saildrive base.
Note on rubber/engraved: 150
Maximum load: 150kg
Thickness shim for SP171609 series engine mount allowing the alignment to be raised by 4mm in a lasting manner.
DNV standards state that the only way to properly level engine mounts is to use shims above 4mm.
Center distances: 145mm
Width: 75mm
Thickness shim for SP136003 series engine mount allowing alignment to be raised by 4mm in a lasting manner.
DNV standards state that the only way to properly level engine mounts is to use shims above 4mm.
Center distances: 100mm
Width: 60mm