Ref. DAM : DM_V _RSP7359250

EPOXY RESIN 450G RSP7359250

0 €0.00 VAT included
€0.00 VAT excluded
On demand
EPOXY RESIN 450G RSP7359250
zoom_in

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
0 €0.00 VAT included
€0.00 VAT excluded

RESINE EPOXY 450G RSP7359250

The epoxy resin kit is a reactive system developed to combine ease and ease of use with mechanical qualities.The versatility of this system makes it a suitable tool for stratification while eliminating crystallization problems due to prolonged storage.

The kit (resin + hardener) allows, thanks to its viscosity, the impregnation of glass fibres, kevlar and carbon, while bringing to the stratified good mechanical qualities.

These qualities can be increased after polymerization by post cooking.

The reactivity of the system from 18°C (minimum working temperature) gives rapid polymerization without smooth contact or bleaching on the surface.

Do not use at a temperature of less than 14°C (air and SUPPORT temperature), in the case of glazing do not put the support outside (humidity and cold before 72 hours).

Read the detailed description
Quantity
Vérifier la compatibilité Identifiez votre moteur pour vérifier la compatibilité de ce produit Vérifier la compatibilité

RESINE EPOXY 450G RSP7359250

The epoxy resin kit is a reactive system developed to combine ease and ease of use with mechanical qualities.The versatility of this system makes it a suitable tool for stratification while eliminating crystallization problems due to prolonged storage.

The kit (resin + hardener) allows, thanks to its viscosity, the impregnation of glass fibres, kevlar and carbon, while bringing to the stratified good mechanical qualities.

These qualities can be increased after polymerization by post cooking.

The reactivity of the system from 18°C (minimum working temperature) gives rapid polymerization without smooth contact or bleaching on the surface.

Do not use at a temperature of less than 14°C (air and SUPPORT temperature), in the case of glazing do not put the support outside (humidity and cold before 72 hours).

Un doute ?  > contact us