Ref. DAM : DM_V _RSP7359250

EPOXY RESIN 450G RSP7359250

0 €0.00 VAT included
€0.00 VAT excluded
On demand
EPOXY RESIN 450G RSP7359250
zoom_in

Pièce non en stock.

Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».

Un conseiller traitera votre demande dans la journée.

On demand
0 €0.00 VAT included
€0.00 VAT excluded

EPOXY RESIN 450G RSP7359250

The epoxy resin kit is a reactive system developed to combine ease and comfort of use with mechanical qualities. The versatility of this system makes it suitable for layering while eliminating crystallization problems due to prolonged storage.

The kit (resin + hardener) allows, thanks to its viscosity, the impregnation of glass, Kevlar and carbon fibers, while providing the laminate with good mechanical qualities.

These qualities can be increased after polymerization by post-curing.

The reactivity of the system from 18°C (minimum working temperature) gives rapid polymerization without sticky contact or surface whitening.

Do not use at a temperature below 14°C (air and SUPPORT temperature), in the case of glazing do not place the support outside (humidity and cold before 72 hours).

Read the detailed description
Quantity
Vérifier la compatibilité Identifiez votre moteur pour vérifier la compatibilité de ce produit Vérifier la compatibilité

EPOXY RESIN 450G RSP7359250

The epoxy resin kit is a reactive system developed to combine ease and comfort of use with mechanical qualities. The versatility of this system makes it suitable for layering while eliminating crystallization problems due to prolonged storage.

The kit (resin + hardener) allows, thanks to its viscosity, the impregnation of glass, Kevlar and carbon fibers, while providing the laminate with good mechanical qualities.

These qualities can be increased after polymerization by post-curing.

The reactivity of the system from 18°C (minimum working temperature) gives rapid polymerization without sticky contact or surface whitening.

Do not use at a temperature below 14°C (air and SUPPORT temperature), in the case of glazing do not place the support outside (humidity and cold before 72 hours).

  • VDM : RSP7359250
Un doute ?  > contact us