PIPE ADMISSION V8 - VORTEC 2C
Intake manifold with 8 fixing screws for 5 litre or 5.7 litre Vortec type V8 engine with 2-barrel carburetor.

Intake manifold with 8 fixing screws for 5 litre or 5.7 litre Vortec type V8 engine with 2-barrel carburetor.
Bolt for Vortec intake pipe length 34mm.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Intake gasket kit for 2.5L V8 SB engine with an intake manifold with 8 Vortec series fixing screws.
Rigid intake gaskets compared to part number FP17320.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Circulation pump for circulating water in the engine block.
Installation intended for V6 - V8 engines with a sheet metal or plastic timing case.
Fixing by 4 screws above the timing case.
TE91112 reassembly gaskets included.
For V6 Vortec engines with an aluminum timing cover only, refer to part number W898N.
Stirring pump gasket for GM base V6 and V8 engines.
Joint sold individually.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Front damper for mounting on the end of a crankshaft with a diameter of 203mm.
Crankshaft pulley for serpentine belt of 5.7 and 6.2 liter engine.
Plastic timing cover for V8 engine without the hole for the crankshaft position sensor.
Housing including oil seal and O-ring for reassembly.
Oil filter bracket for GM V6 and V8 base engines installed on the lower engine with 2 screws.
Oil filter height 8 cm - 13/16 X 16 NPT.
For an oil filter with a height of 13 cm, refer to reference R132.
Rear seal for crankshaft oil seal housing 1 pc.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Rear crankshaft oil seal including mounting hardware for multiple GM base 4 cylinder, V6 and V8 engines.
For assembly with a slight flange on the seal, refer to reference 5512.
Crankshaft position sensor mounted on the plastic timing cover of V6 and V8 small block engines.
As well as on the front face of the timing case of the 8.2L and 7.4L engines.