ARCO STARTER SOLENOID
Solenoid for Arco brand reduction starter types DR30460 and DR51150HP only.
For all other assemblies, please refer to reference SW463.
Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
nan
nan
nan
nan
nan
nan
nan
9-tooth reduction starter designed for attachment to the engine block along the oil pan using 2 screws on the same axis.
Fixing:
- Short screw type PG600
- Long screw type PG601R
Screw kit included.
Starter replacing the older generation without reduction in reference DR9597.
Mounting for flywheel with a diameter of 32.4 cm.
ARCO brand starters are quality products that surpass original starters and cannot be compared with low-end adaptable equipment.
You might also like
Solenoid for Arco brand reduction starter types DR30460 and DR51150HP only.
For all other assemblies, please refer to reference SW463.
Large model 9-tooth starter with 2 fixing screws on the same axle.
- Short screw type PG600
- Long screw type PG601
Screws not included.
9-tooth starter for ARCO DR30460 starter.
ARCO brand DR30460 starter plunger to complement the SW450 solenoid.
Specific starter screw length 11 cm - 3/8-16.
Mounting on reduction starter types DR30460 - DR51150.
For metric screws present on new engine blocks, refer to reference 10/861788.
9-tooth reduction starter designed for attachment to the engine block along the oil pan using 2 aligned straight screws.
Fixing:
- Short screw PG600
- Long screw PG601R
Screws not included.
Starter replacing the older generation without DR9597 type reduction.
Mounting for flywheel with a diameter of 32.4 cm.