RABBIT FOOT PAINTING 100MM
Anti-drip rabbit's foot paint roller.
Length: 100mm
Diameter: 41mm
Axle: 6mm
Use in addition to ROTAK813.

Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
ANTIFOULING ULTRA 300 BLACK - 2.5L
• High performance antifouling
• Durable for racing sailboats and motorboats
• Can be sanded
Ultra 300 is an antifouling product effective against marine organisms, oil film, and plant and animal fouling. It is a premium antifouling product designed for boaters and professionals. Effective in both fresh and salt water. The hard, sandable finish provides antifouling performance for up to 12 months. It can be sanded to provide a smoother finish for optimal glide through the water. Ideal for high-speed boats.
Color: Black
Application: Brush, Roller, Airless.
Dilution: Not recommended
Drying at 15°: 45 min, minimum overcoating time: 10 hours
Launch at 15°: 12 hours
Theoretical PC: 10 m²/L
Practical PC: 9 m²/L
Note: Not suitable for aluminum.
You might also like
Anti-drip rabbit's foot paint roller.
Length: 100mm
Diameter: 41mm
Axle: 6mm
Use in addition to ROTAK813.
180mm black paint tray
Use in addition to ROTA50320 - ROTAK813.
Rabbit's foot holder 100mm.
Length: 420mm
Use in addition to ROTA50320.
PRIMOCON GREY 2.5L
Conventional single-component, pitch-free, quick-drying primer applicable to any substrate (including aluminum) in submerged areas.
USES WITH MICRON, CRUISER, ULTRA, BOATGUARD, UNIPRO LINES.
Can be applied under all International antifoulings, or as an insulating layer over old incompatible or unknown antifouling paint.
Type: Single-component.
Color: Gray.
Application: Brush - Roller - Gun.
Dilution: Diluent No. 3.
Drying at 15°C: Dust-free: 1 hour.
Theoretical PC: 8 m² / Liter with brush.
Practical PC: 7.4 m² / Liter.
Note: 1 to 5 coats depending on the nature of the support. Excellent anti-corrosion treatment for cast iron bowling pins.
Very good insulator on unknown antifouling.
L'adhésif de masquage Tesa® 62204 est composé d'un support PVC stable enduit d'une masse adhésive en caoutchouc naturel.
Cette masse adhésive en caoutchouc naturel offre d'excellentes propriétés adhésives sur un grand nombre de surfaces différentes.
Destiné à des opérations de masquage de courte durée, il offre une délimitation précise des zones de peintures.
Largeur : 24mm
Longueur : 66M