ZF ZF63 - HSW630 REVERSE DISC KIT
ZF63 - Hurth HSW630 Inverter Disc Kit including:
- 8 bronze discs: 2mm x 134mm - 36 teeth
- 10 steel discs: 1.77mm x 96.5
Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
ZF63 - Hurth HSW630 Inverter Disc Kit including:
- 8 bronze discs: 2mm x 134mm - 36 teeth
- 10 steel discs: 1.77mm x 96.5
Complete repair kit including seals and discs for ZF63V - ZF63IV - HSW630 - HSW630IV V-DRIVE hydraulic inverter.
Complete plate for Mercruiser Bravo base with AXIUS mounting.
This plate assembly includes all the elements present on the transom when the base is removed, namely:
- Jacks
- Bellows
- Reversal cable
- Yoke
- Bowl
- Trim sensors
- Reassembly kit including axles and screws.
Remember to add the reassembly seals 28400 and 41802
Remanufactured reverse rotation RH engine block pre-1990 for GM 7.4 liter V8 base
Features :
- 2-piece rear crankshaft oil seal
- GM454 generation IV engine base
- Oval intake passages
- Kit of 2 sprockets for the distribution (without chain)
- Reverse rotation: ignition 1-2-7-5-6-3-4-8
- Drilling for the fuel pump axle
Engine including:
- Rocker cover (G6 type aluminum)
- Sheet metal oil pan
- Timing case
- Front damper
- Intake and exhaust gaskets
Perfect product for replacing your Crusader, Chriscraft, RIVA engine...
Engine reconditioning includes the grinding, machining, replacement and inspection of all key components to provide you with a marine engine block capable of replacing your old mechanics.
Engine including high quality internal parts to meet marine requirements.
Quicksilver Plus Engine Pack 350 Series MPI Bravo 300HP
Compatible with Bravo bases, this engine features optimal durability thanks to Black-X valve technology. Runs on 98 unleaded fuel, it is perfectly suited as a replacement for 5.0L, 5.7L carbureted engines with single-point injection and compatible with SmartCraft digital gauges.
Main features:
- Mercruiser GEN II fuel cooling,
- ECM 555,
- Engine Guardian Protection,
- Engine injection system Multipoint injection,
- Multi-point draining,
- Cast iron engine block,
- Dry joint cast iron exhaust manifold coated with electroplated paint,
- wet seal exhaust elbow,
- Cooling by raw water,
- Integrated rinsing system,
- Accessory drive Serpentine belt,
- Lubrication High Flow 60 psi oil pump,
- Mechanical accelerator and reverse gear,
- Harness with 10-pin connector,
- SmartCraft connector,
- Maximum speed 4800 - 5200 RPM, kW at the flywheel 300 / 224
- Cylinder capacity (CID/L) 350 / 5.7
- Bore and stroke 4.03 x 3.48" / 101.60 x 88 mm
- Compression ratio 9.4:1
- Tolerance to ethanol up to 10%.
- Alternator (amp/watt) 65 amp / 917 Watt
- Recommended Oil Mercury MerCruiser 25W-40 Synthetic Blend, NMMA Certified FC-W Synthetic Blend
- Hypereutectic alloy pistons
- Camshaft and roller tappet
- 1.5:1 stamped rocker arms
- Dimensions (L x W x H) 32 x 30 x 22" / 814 x 740 x 559 mm
- Weight (engine only) 423 kg / 932 lbs
Mercury Marine and Quicksilver products carry a one-year factory warranty against defects. Items such as engines, drives, and plates must be installed by a dealer for the warranty to be valid.
New VORTEC type engine block for GM V8 5 liter base with 8 fixing screws for the intake manifold.
Features :
- One-piece rear crankshaft oil seal
- 8 fixing screws for the intake pipe
- Centrally mounted rocker cover
- Standard rotation: ignition 1-8-4-3-6-5-7-2
- VORTEC type cylinder heads
Perfect product for replacing your Mercruiser, Volvo, OMC , Crusader engine...
Engine block including the following positions:
- Timing case
- Rocker covers
- Oil pan
- Front damper