90° ELBOW WATER CONNECTION MM - 3/4 X 1
90° cooling fitting size 3/4 NPT x 1 inch.
For 25mm diameter hose.

90° cooling fitting size 3/4 NPT x 1 inch.
For 25mm diameter hose.
90° cooling fitting size 3/4 NPT x 3/4.
For 19mm diameter hose.
90° elbow cooling connector male - male for Crusader manifolds types: 97993 - 97992 - 97753 - 97752
Thread: 1'
Hose: 32mm 1-1/4"
For assembly with purge see reference 30624.
90° male-male elbow fitting.
Thread: 3/8 NPT
Hose: 1/2
3-way oil fitting 1/8-27 for oil pressure sensor in particular.
Air sensor gasket for Ford injection 302 and 351 engines.
Gasket included in kit:
- AP9017
- MS95952
3/4 aluminum pencil anode with a purge hole on the cap.
Anode for V-DRIVE inverter 2020 and later.
Cooling hose between the circulation pump and the intake manifold on a big block engine.
Tappet guide plate for GM 454 -502 - 496 engine with roller tappets.
Low pressure fuel pump for new PCM engines that have the pump directly on the FCC body.
8 Qt - 7.5 Liter sheet metal oil pan for GM454 and GM502 engines after 1990 with a one-piece pan gasket type FP17986.
Side gauge well or banjo fitting tapping on underside of crankcase.
Catalyst filter for PCM exhaust manifold.
Oxygen sensor with 6 parallel pins.
Complete thermostat kit for Crusader engine including lower and upper crankcase as well as reassembly parts, namely:
- Thermostat: 96319
- Joint: 96105
- Joint: 97361
- Valve: 96066
- Valve: 96065
- Spring 96686
- Set of screws
Complete FCC fuel module for PCM and Crusader engines with the low pressure fuel pump directly on the pump block.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Complete FCC gasoline module for PCM engines with the low pressure pump directly on the pump block.
Assemblies not having fuel return.
For the assembly with the fuel return on the module with cooling by a hose, refer to reference RA080034A.
OLD VERSION FACTORY MODIFICATION:
Older assemblies with an independent low-pressure fuel pump (type P4594) are now replaced by this type of module integrating the high and low-pressure pump. PCM informs us that this is the only replacement product for the old pumps.
The fuel pipe and connectors are similar.
Complete FCC gasoline module for PCM H5 - H6 engines.
Complete FCC fuel module for PCM and Crusader engines that do not have the low pressure pump directly on the block.
6L - ZR old generation assemblies.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Holley brand 4 barrel carburetor 4160 series - 600CFM for FORD base engine with a single fuel inlet.
Applications: Volvo Penta, PCM, OMC , Indmar
703/47 carburetor kit.
Remember to add the FP17841 mounting gasket.
Full MRI80 reverse kit for GM type PCM engine with ratio 1.23/1.
IRM40 type reversers are now replaced by more robust IRM80 series reversers.
Kit including:
- Reverse
- Oil cooler
- Coupling
- Flexible
- Installation kit
IRM80S PCM inverter kit for GM motor in V-DRIVE mounting with a ratio of 1/1.
Conversion allowing the replacement of the old IRM40 inverser by this new generation more efficient.
Kit including:
- Reverse RA157025
- Coupling
- Oil cooler
- Flexible
- Installation kit